Spring Cone Crusher Updates Acceleratingly
Zhengzhou YiFan machinery company, Spring cone crusher adopts the international advanced techniques to develop this equipment. The design of spring cone crusher structure is distinguish from traditional design, and it compiles other advantage of various type of Cone crusher. The spring safety system of crusher acts as an overloading protection system that allows metal to pass through the crushing chamber so as not to damage the cone crusher. The safety system uses dry oil and water as two kinds of sealed formation to make plaster powder and engine oil separate to make sure reliable performance. Screw classifier, Type of the crushing cavity is decided by the application of the ores. The standard type is applied to secondary crushing; the medium type and the short-head are applied to fine crushing.
Spring cone crusher consist of frame, primary crusher transmission device, hollow eccentric shaft, bowl-shaped bearing, crushing cone, springs and hydraulic pressure station for adjusting discharge opening.
When the spring cone crusher is working, the motor drives the eccentric bearing bushing via spring coupling, transmission shaft and a couple of cone gear wheel. The crushing cone axis is forced to swing by the eccentric bearing bushing, which makes the mantle sometimes close to the bowl liner, rotary kiln and some times far away from the bowl liner. The raw materials are pressed, impacted and finally crushed in the crushing chamber.
Continuous rotating of movable cone; continue unloading of materials during the crushing process alternately along the work surface, high production efficiency and capacity.
Material is extruded in two cones, squeezed and bended, which can low power consumption.
Cubic product shape and the cones surface is more uniform wear
Main structures is consist of main body, the horizontal axis, movable cone, balancing wheels, eccentric shaft bushing, fixed cone, Raw material mill dynamic cone, fluid couplings, lubrication systems, hydraulic system, control system, etc.
Dynamic cone and fixed cone is upright. There is a gap parallel with the crushing discharge chamber when the movable cone swinging, which make uniform products. The feed edge is not big enough, so the material after primary crushing is suitable for crushing.
This series cone crusher adopt dry-oil and water seal way, Flotation cells which protect from dust and impurities entering the body, thus extending the service life of the sliding bearing and the thrust ball bearings to ensure the reliable.
The spring cone crusher has been widely used in the industries of metallurgy, building, road building, phosphate and chemical industry, to crush various kinds of raw materials with medium and high hardness, such as iron ore, copper ore, limestone, quartzite, granite, sandstone, etc.
PREV: How does cone crusher Works?
NEXT: The Characteristics of Yifan Cne Crusher
Please input your inquiry in below form, we will get back to you as soon as possible!
Privacy Policy